Daily Archives: Friday, February 19, 2016

  • Free Winter Boat Protection Advice Offered By Your Marine Performance Parts Experts

    image

    Marine Performance Parts Specialist Offers You Winterization Tips

    Stainless Marine your marine performance parts professionals would like to share with you these topics we thought would be of interest to you this month regarding protecting your boat this winter.

    Your marine performance parts experts know that the coming of cooler weather means an end to the boating and motorcycling season for many. Chiefly important in preparing these vehicles for winter is managing the potential for engine damage from the federally-mandated ethanol blend in our nation’s gasoline supply.

    High performance marine engine parts professionals know that ethanol in gasoline stored for long periods can damage marine and motorcycle engines: “phase separation” of the fuel can leave a corrosive water-soaked ethanol mixture at the bottom of the gas tank.

    Your high performance marine parts know that half of the respondents of a recent Boat Owners Association of The United States (BoatU.S.) survey reported that they have had to replace or repair their boat engine or fuel system parts due to suspected ethanol-related damage, costing an average $1,000 for repairs.

    You can find more information as well as get assistance on high performance marine parts and on how to protect your boat this winter at Stainless Marine.

    To prevent ethanol problems or performance marine problems over the winter, boats with built-in gas tanks should have fuel stabilizer added and the tank left nearly full.

    Marine Performance Parts Specialist Continues Discussion on Ethanol Gas Usage to Protect Your Boat This Winter

    So how did ethanol get into our gas? Signed into law in 2005 and expanded in 2007, the Renewable Fuel Standard (RFS) requires an increasing amount of biofuels such as corn ethanol to be blended into the gasoline supply. However, the ethanol mandate has failed to achieve promised consumer and environmental benefits.

    In addition to winter storage and engine repair concerns, ethanol-blended fuel is actually worse for our air and water. Your high performance marine engine experts know that according to research from the University of Tennessee, ethanol’s “clean alternative” record is “highly questionable.”

    But the Environmental Protection Agency ignores the public’s concerns and continues to increase the amount of ethanol required to be blended in our nation’s gas. Even though it’s illegal to use E15 (15 percent ethanol by volume) in marine engines, snowmobiles, motorcycles, lawnmowers, and any vehicle made before 2001, E15 can now be found in 24 states.

    With a recent $100 million USDA grant made available to subsidize the installation of blender pumps at gas stations throughout the country, access to ethanol-free gas may soon be more difficult, leading to even more cases of inadvertent misfueling and engine damage.

    So don’t forget these helpful suggestions and tips on how to protect your boat this upcoming winter. 1) Remember that preparing your vehicles for winter is managing the potential for engine damage from the federally-mandated ethanol blend in our nation’s gasoline supply; 2) Ethanol in gasoline stored for long periods can damage marine and motorcycle engines; and 3) in addition to winter storage and engine repair concerns, ethanol-blended fuel is actually worse for our air and water.

    Stainless Marine has more information on marine performance parts, high performance marine parts, outboard engine brackets, and on how to protect your boat this winter.

    via Winterization and Ethanol Blended Fuels

  • Boat Water Heater Expert Helps You Put On Your Lightning Proof Suit of Armor

    Boat Water Heater Professional Gives Advice on Staying Safe in Life-Threatening Situations

    Raritan Engineering Company your boat water heater specialists would like to share with you these topics we thought would be of interest to you this month regarding how to protect your boat from lightning strikes.

    Your boat water heater experts know that this spring seems to have brought the most extreme weather in history. With heavy thunderstorms you will often find lightning. Lightning on the water can bring life-threatening circumstances.

    Even though the odds are in your favor that your boat may never be hit by lightning, if it happens it can have devastating effects. Boat water heater installation experts say, don’t take a chance, protect yourself. If you are in a small boat and close to shore when a thunderstorm approaches, get in and off the water immediately. Better yet, don’t go out if thunderstorms are predicted.

    Your marine hardware professionals know that the voltages involved in lightning are so high that even materials that would normally be considered non-conductive become conductors, including the human body.

    You can find more information as well as get assistance on marine hardware and on how to protect your boat from lightning at Raritan Engineering.

    Several marine water heaters for boats analysts agree that the voltages are so massive that if they start to travel through a boat’s structure – say through its mast – then meet with high resistance (for instance, the hull skin) the current discharge, in its attempt to reach ground, may simply blow a hole in the non-conductive barrier.

    Boat Water Heater Expert Explains Further Lightning Protection

    In theory, a lightning protection system is used to create what is know as a “Faraday’s cage,” so called after the late nineteenth-century scientist Michael Faraday. The principle of a Faraday’s cage is to provide a surrounding, well-grounded, metal structure, in which all of parts are bonded together and carry the same electrical potential.

    So how does a lightning protection system work? In a boat, the “cage” is formed by bonding together, with heavy conductors, the vessel’s mast and all other major metal masses. A marine electrician must tie in the engines, stoves, air conditioning compressors, railings, arches etc. with a low resistance wire which would ultimately provide a conductive path to ground (the water) usually via the engine and propeller shaft, keel bolts, or better yet, a separate external ground plate at least 1 square foot in dimension.

    Boat water heater connectors specialists know that this means that if the aluminum mast of the average sailing vessel is properly bonded to the vessel’s other major metal masses and is given a direct, low-resistance conductive path to ground, the entire boat should fall within the protected zone.

    So don’t forget these helpful pointers on how to protect your boat from lightning strikes. 1) If you are in a small boat and close to shore when a thunderstorm approaches, get in and off the water immediately; 2) an even better tip, don’t go out if thunderstorms are predicted; and 3) put forth the time and effort into making your lightning proof system. It will be worth the effort.

    Raritan Engineering has more information on boat water heater, marine hardware, marine water heater, and on how to keep your boat lightning proof.

    via Cone of Protection from Lightning – Faraday’s Cage

    http://raritaneng.com/boat-water-heater-expert-helps-you-put-on-your-lightning-proof-suit-of-armor/

  • Boat Water Heater Expert Helps You Put On Your Lightning Proof Suit of Armor

    image

    Boat Water Heater Professional Gives Advice on Staying Safe in Life-Threatening Situations

    Raritan Engineering Company your boat water heater specialists would like to share with you these topics we thought would be of interest to you this month regarding how to protect your boat from lightning strikes.

    Your boat water heater experts know that this spring seems to have brought the most extreme weather in history. With heavy thunderstorms you will often find lightning. Lightning on the water can bring life-threatening circumstances.

    Even though the odds are in your favor that your boat may never be hit by lightning, if it happens it can have devastating effects. Boat water heater installation experts say, don’t take a chance, protect yourself. If you are in a small boat and close to shore when a thunderstorm approaches, get in and off the water immediately. Better yet, don’t go out if thunderstorms are predicted.

    Your marine hardware professionals know that the voltages involved in lightning are so high that even materials that would normally be considered non-conductive become conductors, including the human body.

    You can find more information as well as get assistance on marine hardware and on how to protect your boat from lightning at Raritan Engineering.

    Several marine water heaters for boats analysts agree that the voltages are so massive that if they start to travel through a boat’s structure – say through its mast – then meet with high resistance (for instance, the hull skin) the current discharge, in its attempt to reach ground, may simply blow a hole in the non-conductive barrier.

    Boat Water Heater Expert Explains Further Lightning Protection

    In theory, a lightning protection system is used to create what is know as a “Faraday’s cage,” so called after the late nineteenth-century scientist Michael Faraday. The principle of a Faraday’s cage is to provide a surrounding, well-grounded, metal structure, in which all of parts are bonded together and carry the same electrical potential.

    So how does a lightning protection system work? In a boat, the “cage” is formed by bonding together, with heavy conductors, the vessel’s mast and all other major metal masses. A marine electrician must tie in the engines, stoves, air conditioning compressors, railings, arches etc. with a low resistance wire which would ultimately provide a conductive path to ground (the water) usually via the engine and propeller shaft, keel bolts, or better yet, a separate external ground plate at least 1 square foot in dimension.

    Boat water heater connectors specialists know that this means that if the aluminum mast of the average sailing vessel is properly bonded to the vessel’s other major metal masses and is given a direct, low-resistance conductive path to ground, the entire boat should fall within the protected zone.

    So don’t forget these helpful pointers on how to protect your boat from lightning strikes. 1) If you are in a small boat and close to shore when a thunderstorm approaches, get in and off the water immediately; 2) an even better tip, don’t go out if thunderstorms are predicted; and 3) put forth the time and effort into making your lightning proof system. It will be worth the effort.

    Raritan Engineering has more information on boat water heater, marine hardware, marine water heater, and on how to keep your boat lightning proof.

    via Cone of Protection from Lightning – Faraday’s Cage